Lean Techniques: Yokoten May 1, 2010 If you have never heard the term Yokoten, prepare yourself. It has been added to the Lean Operations lexicon as an important activity. Yokoten is being used by lean firms to help them become leaner. Yokoten is a Japanese term that can be roughly translated as “across everywhere.”
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Sustaining a Lean Culture November 1, 2009 Earlier this year, at the 21st annual Shingo Prize conference awards ceremony, Autoliv Americas’ airbag module facility in Ogden, UT, was awarded The Shingo Prize for Operational Excellence. This was the second Shingo Prize won by the Autoliv Ogden Airbag Assembly (AOA) plant.
Lean Efforts Capture the Shingo November 1, 2007 A subsidiary of HNI Corp. (Mustacine, IA), the second-largest manufacturer of office furniture in North America, Hearth & Home Technologies (HHT; Mt. Pleasant, IA) manufactures sheetmetal fireplaces (both wood and gas-burning), vent pipe, and fireplace accessories. The company has four manufacturing facilities.
Programming CMMs May 1, 2004 Off-line programming software tools for CMMs allow manufacturers to increase measurement capacity and throughput by programming CMMs, probes, and fixtures before parts are made.
How to Run a Factory: Timeless Advice from the Late Jim Harbour October 2, 2014 Here’s something you can cut out and hang on your bulletin board if you run a manufacturing company, large or small. I’ve spent nearly 60 years thinking about the factory floor, and here’s how I believe it should be run.
Honeycomb Heroes: Making Composites for Aerospace June 24, 2016 There’s an old saw that if bumblebees were aeronautical engineers they would know they can’t fly. Quite apart from the miracle of their flight, bees also happen to make a lightweight structure of surprising strength, just the sort of thing you’d want if you were building aircraft: honeycomb.
To U-Shape or Not to U-Shape? January 28, 2015 Batch and queue is the hallmark of a mass production system. Parts are processed, moved in large quantities to the next process, wait for their turn, are processed, and moved as a batch to the next process.
Searching for the Perfect Lightweighting Recipe September 1, 2016 Lightweighting is so established it’s now part of marketing for new vehicles. Automakers routinely detail how much less models weigh than their predecessors. General Motors Co., for example, has said a range of its vehicles is anywhere from almost 250 lb (112.5 kg) to 700 lb (315 kg) lighter.