Displaying 21-30 of 124 results for

It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.

Shops today must track or measure their manufacturing operations to improve them. This need drives the growing use of MTConnect—an open, royalty-free protocol for extracting data from practically any piece of equipment, including machine tools and other manufacturing systems. The integration of MTConnect is a major undertaking, and can be a bit challenging unless certain preparations are made ahead of time.

An early pioneer in the field of additive manufacturing (AM), the story of Carl R. Deckard, PhD, ME, is an example of the University of Texas motto: “What Starts Here Changes the World.”

Robotic machining technology has advanced to where it poses a serious alternative to metalcutting applications on more traditional machining centers. With the latest robotics equipment and related software, automation suppliers and robotic system integrators are gaining some traction using robots in many material-removal applications previously done only with machine tools.

Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.

Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.

Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.

One of the most cost-effective ways to obtain the benefits of automation is by adding a bar feeder to a CNC lathe or other bar machine. Costing anywhere from about $10,000 to $40,000 depending on configuration, the devices can add hours of untended operating time for part volumes of a few hundred to tens of thousands.

The ongoing digital transformation of manufacturing comes baked-in with many uncertainties, and the automotive business is no exception.

There are pros and cons to using a scaffold for tissue printing. Ultimately, it’s not a matter of choosing one method over the other, but using them to complement each other.