HVOF Coating Puts Grinding Machines to the Test August 2, 2016 Manufacturers continually seek ways to make their products stronger and last longer. High Velocity Oxygen Fuel (HVOF) spray coatings help achieve those goals. However, grinding the coatings can be a challenge.
Automating the Grinding Process June 1, 2013 Whether the process is cylindrical or profile grinding, automation, which can increase cycle time, throughput, consistency of part quality and taking real-time in-process measurements, is once again in demand. The reasons can be found in the benefits found in typical applications and the innovative and effective forms of automation available from machine builders like United Grinding Technologies Inc. (UGT; Miamisburg, OH), and their automation integrator of choice, Matrix Design Inc. (Elgin, IL).
Dunnage: Often Ignored, Always Important October 1, 2012 Dunnage used to ship and process automotive parts on the shop floor is a key component in the overall manufacturing process, yet it is often overlooked when companies are working to make lines lean and green. Today, it is important that manufacturers know that most dunnage used to transport parts from start to finish can be reused for the lifetime of production.
Drilling Difficult Materials January 1, 2012 Drilling a hole to required specification in production drilling can be challenging when the workpiece material is especially difficult-to-machine.
Grinding the Hard Stuff August 1, 2007 Expanding use of ever-harder materials has opened the door to wider use of grinding processes on materials such as titanium, ceramics, and superalloys.
Geometry Lesson Teaches Corvette How to Lighten Up October 14, 2016 It’s been almost two decades since the C5 Corvette hit the streets with its groundbreaking chassis built around hydroformed steel bumper-to-bumper frame rails. The technology gave engineers a chance to create components that were both lighter and stiffer than traditional stamped and welded assemblies.
Extrusion and Drawing Knowledge January 2, 2015 Extrusion and drawing, two related, stalwart topics in material forming, are covered from top of punch to bottom of die in more than 200 papers in the SME Technical Paper library. The range of contributors is broad, from companies like Alcoa, Westinghouse, ASEA, Western Electric and General Electric to universities in Japan, Germany and the US, as well as individual entrepreneur metalworking shops.
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.