New Metrology Culture Improving Chrysler Quality September 1, 2013 “Five years ago, our fit and finish was below average,” said Dr. Raj Kawlra, director of dimensional strategy and management of Chrysler Group (Auburn Hills, MI). “To be the future world-leaders, we knew that we had to focus on all aspects of quality … vehicles that look good, feel good, sound good, and are reliable.”
Tooling to Match Composite Production April 1, 2009 It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Solutions for Difficult Machining January 1, 2009 The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Programming CMMs May 1, 2004 Off-line programming software tools for CMMs allow manufacturers to increase measurement capacity and throughput by programming CMMs, probes, and fixtures before parts are made.
Companies Push the Boundaries of 3D Printing Composites October 26, 2016 Entrepreneurs and existing manufacturers are making 3D printers that automate production of composite parts, and are unique in their design.
Searching for the Perfect Lightweighting Recipe September 1, 2016 Lightweighting is so established it’s now part of marketing for new vehicles. Automakers routinely detail how much less models weigh than their predecessors. General Motors Co., for example, has said a range of its vehicles is anywhere from almost 250 lb (112.5 kg) to 700 lb (315 kg) lighter.
3D-Printed Parts Restore Cars’ Glory August 12, 2016 Daimler may be the first vehicle maker to offer 3D-printed replacement parts, but racing enthusiasts and car collectors like Jay Leno have been using additive manufacturing and 3D scanning for many years to replace worn-out parts or to enhance their rides.
Honeycomb Heroes: Making Composites for Aerospace June 24, 2016 There’s an old saw that if bumblebees were aeronautical engineers they would know they can’t fly. Quite apart from the miracle of their flight, bees also happen to make a lightweight structure of surprising strength, just the sort of thing you’d want if you were building aircraft: honeycomb.
Fiber Lasers Continue to Gain Market Share in Material Processing Applications February 1, 2016 The first kilowatt-class fiber laser for material processing was introduced by IPG Photonics in early 2002. Since that time, the adoption of fiber lasers for production applications has grown at a rapid rate. Today, fiber lasers are becoming the choice for most major production laser applications as well as converting traditional welding and cutting processes to fiber laser technologies.
Speeding Up Moldmaking Processes April 27, 2016 Moldmaking is making a comeback, with more reshoring to North America of mold-and-die manufacturing that left for the Far East and other low-cost manufacturing centers. With faster metalcutting through high-speed machining (HSM) and improved EDM techniques, mold-and-die shops are finding innovative ways to compete with manufacturing operations in traditionally low-cost labor markets.