Displaying 31-40 of 163 results for

It is common sense—a vehicle that weighs less requires less fuel to move it. A number of studies show that reducing the mass of a vehicle by 10% results in anywhere from 4.5 to 6% better fuel economy—well worth the effort.

When a contract manufacturer sees an opportunity in the competitive aerospace market, it sets priorities aimed at providing the right combination of processes required to meet the industry’s exacting demands. Precision machining and finishing, parts inspection, and, of course, certifications from OEMs and industry alliances are at the top of the list. Increasingly, aerospace suppliers like Volvo Aero Connecticut (Newington, CT) are benefiting from five-axis machining, advanced CNC controls, motors and drives, robotic deburring, and on-machine inspection for a competitive advantage.

From Boeing 787s to new Navy destroyers, fiber-reinforced composites are gaining in use. As production scales up, more-efficient manufacturing remains a focus. One key to that efficiency is tooling for composites. These molds and forms give the final shape to a part, and are often integral to their final curing.

Robotic machining technology has advanced to where it poses a serious alternative to metalcutting applications on more traditional machining centers. With the latest robotics equipment and related software, automation suppliers and robotic system integrators are gaining some traction using robots in many material-removal applications previously done only with machine tools.

Edge finishing is a relatively new term in manufacturing. It’s a new and deeper focus on what many used to call deburring, edge honing, edge preparation, edge prepping, burring, chamfering, or edge blending. Edge finishing goes beyond any of those definitions. Deburring, which is often considered wasted effort by managers, wrongly carries a negative connotation. In reality, deburring and edge-finishing processes add many benefits to parts—they create highly desirable edge quality—the quality most products need.

Workholding techniques using a magnetic field, a vacuum, or an adhesive can be effective alternatives to clamps. When these techniques are used, more part area is available for the cutting tools, thin parts can be held, and initial setup can be fast and simple. Plus, there is a potential for smoother surfaces and a shorter overall production cycle.

Keeping products clean is becoming a more significant part of manufacturing as standards for cleanliness, deburring, and finish grow more stringent.

One of the most cost-effective ways to obtain the benefits of automation is by adding a bar feeder to a CNC lathe or other bar machine. Costing anywhere from about $10,000 to $40,000 depending on configuration, the devices can add hours of untended operating time for part volumes of a few hundred to tens of thousands.

Cutting tool maker Shape-Master Tool Co. (Kirkland, IL) needed to expand its tool grinding capability beyond that of its conventional machines or run the risk of losing work to the competition.

When work in the oil field dried up due to poor economic conditions, Knust-Godwin LLC, a Texas oil & gas supplier, faced new challenges following transitioning into small parts machining. Rather than hunker down and wait out the cyclical downturn as many shops would do, David Prickett, sales manager, and Knust-Godwin management agreed they should work to diversify the company’s customer base.