Demand for fluid ends is rising because of increased drilling and the component’s short lifespan.
Displaying 1-10 of 44 results for
These days the most important theme in superabrasive grinding wheel development isn’t the abrasive, it’s the bond. The diamond or CBN grains do the cutting, but the bond plays a decisive role in exposing the grains to the workpiece and enabling coolant to remove heat.
Machine manufacturers are working to streamline the gear-making process, to deliver a more highly finished gear in fewer steps.
The challenge of machining hip replacement implants out of cobalt chrome
When sizing up an application for a milling toolholder, it is necessary to consider the materials being machined, how aggressively metal is going to be removed, and any machining conditions that are likely to present a challenge to tooling security. By now, the pros and cons of hydraulic, mechanical, and heat-assisted shrink-fit systems are well known and results well documented.
“We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”
It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
A lot of attention is paid to the “business end” of CNC toolholders–the part that actually holds the tool.
New retrofit systems make it possible to quickly, easily and cost effectively transform the standard external-coolant live tooling heads on turning machine turrets into those with through-tool-coolant capability. And shops that have done the retrofit are experiencing longer tool life, more efficient chip control and less heat generation.