Demand for fluid ends is rising because of increased drilling and the component’s short lifespan.
Displaying 1-10 of 63 results for
These days the most important theme in superabrasive grinding wheel development isn’t the abrasive, it’s the bond. The diamond or CBN grains do the cutting, but the bond plays a decisive role in exposing the grains to the workpiece and enabling coolant to remove heat.
“We are developing solutions for power workholding such as hydraulic swing clamps and block clamps, because the real estate on a fixture is so valuable,” says Jason Betz, product specialist for Carr Lane Roemheld (St. Louis). “This pushes the use of smaller workholding components as much as possible because the more parts on the fixture the greater the productivity.”
A subsidiary of HNI Corp. (Mustacine, IA), the second-largest manufacturer of office furniture in North America, Hearth & Home Technologies (HHT; Mt. Pleasant, IA) manufactures sheetmetal fireplaces (both wood and gas-burning), vent pipe, and fireplace accessories. The company has four manufacturing facilities.
It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
Earlier this year, at the 21st annual Shingo Prize conference awards ceremony, Autoliv Americas’ airbag module facility in Ogden, UT, was awarded The Shingo Prize for Operational Excellence. This was the second Shingo Prize won by the Autoliv Ogden Airbag Assembly (AOA) plant.
The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Automotive supplier Faurecia (Nanterre, France) decided it needed to get serious about Industry 4.0 fast.
Machine manufacturers are working to streamline the gear-making process, to deliver a more highly finished gear in fewer steps.
When a manufacturer has excess inventory not adding value to the process, the inventory is hurting the company’s balance sheet, and is by definition wasteful.