It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.
Displaying 21-30 of 83 results for
It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”
The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.
Off-line programming software tools for CMMs allow manufacturers to increase measurement capacity and throughput by programming CMMs, probes, and fixtures before parts are made.
Lightweighting is so established it’s now part of marketing for new vehicles. Automakers routinely detail how much less models weigh than their predecessors. General Motors Co., for example, has said a range of its vehicles is anywhere from almost 250 lb (112.5 kg) to 700 lb (315 kg) lighter.
There’s an old saw that if bumblebees were aeronautical engineers they would know they can’t fly. Quite apart from the miracle of their flight, bees also happen to make a lightweight structure of surprising strength, just the sort of thing you’d want if you were building aircraft: honeycomb.
Daimler may be the first vehicle maker to offer 3D-printed replacement parts, but racing enthusiasts and car collectors like Jay Leno have been using additive manufacturing and 3D scanning for many years to replace worn-out parts or to enhance their rides.
Challenged by an increasingly niche-oriented automotive market, The Chrysler Group (Auburn Hills, MI) must increase the number of models it offers while decreasing its capital investment. The company plans to offer 50% more models in 2009 compared to 2004, according to John Felice, VP of manufacturing, technology and global enterprise for Chrysler.
The first kilowatt-class fiber laser for material processing was introduced by IPG Photonics in early 2002. Since that time, the adoption of fiber lasers for production applications has grown at a rapid rate. Today, fiber lasers are becoming the choice for most major production laser applications as well as converting traditional welding and cutting processes to fiber laser technologies.
When GE decided that additive manufacturing was the way to go for making metal fuel nozzles for its new LEAP engine, the company touched off interest in other shops to move 3D printers from the design studio to the factory floor. It also stepped up the focus on safety standards for metal AM.