Skip to content
SME Home Search Search Results

Displaying 11-20 of 72 results for

Search Filters: 2016 or earlier clear Machining & Metal Cutting clear Grinding & Deburring clear Welding & Cutting clear Materials clear

Metrology Gets Connected

“Metrology and its relationship to manufacturing is rapidly evolving,” Ken Woodbine, president, Wilcox Associates, a brand of Hexagon Metrology (North Kingstown, RI), recently observed. “We are seeing larger quantities and faster speeds of measurement data collection. The next challenge is what to do with all that data.”

Advances in Hand-Held Metrology

While high-end metrology devices like advanced laser scanners or precision CMMs garner a lot of attention, it is hard to imagine any industrial setting without the presence of work-a-day hand-held, contact metrology tools such as calipers or micrometers. That is what Justin Frazzini, quality manager for A.A. Jansson (Waterford, MI), retailer and calibration and repair service provider, observes in his practice.

Measure It On The Machine

Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.

High-Speed Cutting for Small Precision Parts

Dau Thermal Solutions Inc. (Macedon, NY) was finding that its spindle speeder was definitely not up to speed when it came up against the test results for NSK’s HES510 series electric spindle.

Metal Parts Follow Tough Plastics Act

When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.

Electropolishing Automation

Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.

CAD/CAM Tools Ease Programming Complexity

Advanced simulation, new toolpath techniques aid programming of highly complex machinery. CAD/CAM software developers continue to refine simulation capabilities and toolpath techniques that enable programming highly complex equipment including multiaxis and multitasking machine tools.

Drill/Tap Centers Take to Milling

It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.

Tooling to Match Composite Production

It’s getting harder to imagine any market that isn’t benefiting from the latest developments in parts manufactured from advanced composites. “Advanced composites will arguably dominate consumer and production products, especially in the near future,” says Bert Erdel, industry consultant and executive technology advisor, Morris Group Inc. (Windsor, CT), “as they have begun to gain wide acceptance in solving energy-related issues.”

Solutions for Difficult Machining

The machining challenges for two of the most advanced concepts in cutting tool materials are pretty well known. Cubic boron nitride (CBN) tools of varying designs are being used to cut hardened ferrous metals with or without interrupted cuts, as well as welded and clad metals.