Metrology Gets Connected September 1, 2015 “Metrology and its relationship to manufacturing is rapidly evolving,” Ken Woodbine, president, Wilcox Associates, a brand of Hexagon Metrology (North Kingstown, RI), recently observed. “We are seeing larger quantities and faster speeds of measurement data collection. The next challenge is what to do with all that data.”
Measure It On The Machine January 1, 2013 Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.
Micro Manufacturing Keeps Shrinking the Envelope January 1, 2013 Micro components continue to shrink in size, demanding ever-greater precision and improved handling of parts with sub-micron-sized features. New approaches in micro machining technology include higher-precision systems from traditional micro machining developers, as well as techniques using additive manufacturing processes and semiconductor wafer-scale technology on the smallest of micro parts.
Electropolishing Automation April 1, 2012 Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.
Drill/Tap Centers Take to Milling August 1, 2009 It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.
Deburring in Forming and Fabricating: Part 2 June 18, 2020 Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce deburring costs in forming and fabrication operations, such as improving product design; preventing burrs; minimizing burr properties; and removing burrs during the main fab process. Also discussed are how shops can determine if deburring or edge finishing is needed, and how they can choose among the 124 different deburring processes.
Spotlight on Welding with AWS April 24, 2020 April is National Welding Month and exciting things are happening within the industry. In this podcast, Chris Mahar, Associate Editor of Manufacturing Engineering magazine, talks with Monica Pfarr, Executive Director of the American Welding Society Foundation about what’s happening in the industry and what AWS is doing to celebrate. From the industry as a whole to the current market temperature and the workforce, this podcast is a welding one-stop-shop.
GMTA Offering Stiefelmayer Lasers In North America December 18, 2020 Full line of fiber and diode laser machines for cutting and hardening
Shop Uses Toolpath Simulation to Find and Eliminate Potential Machining Errors December 5, 2019 Midway between Houston and Austin sits Brenham, Texas, home to Blue Bell ice cream and the world’s largest BBQ pit. Within this smallish town you’ll find a not-so-small contract manufacturer, MIC Group LLC.
The Light and Dark of Manufacturing November 27, 2019 As I walked through the DMG Mori factory in Davis, Calif., during the company’s Manufacturing Days event in October, there was something noticeably different about it compared to other factories I’ve visited: it was brightly lit and quiet.