Change-up Pitch: From Metal to Plastic October 2, 2014 Even though it’s been around since the 1950s, when engineering-grade resins were first introduced, many manufacturers still are not familiar with the many benefits that metal-to-plastic conversion provides.
Measure It On The Machine January 1, 2013 Why use a metrology device on or near a machine tool? It isn’t just useful for making sure a tool is present or monitoring tools for wear or breakage. On-machine measurement technologies can save time and money, by speeding up processes and eliminating extra personnel, and they are a critical step in the movement towards “lights-out” manufacturing.
Micro Manufacturing Keeps Shrinking the Envelope January 1, 2013 Micro components continue to shrink in size, demanding ever-greater precision and improved handling of parts with sub-micron-sized features. New approaches in micro machining technology include higher-precision systems from traditional micro machining developers, as well as techniques using additive manufacturing processes and semiconductor wafer-scale technology on the smallest of micro parts.
Electropolishing Automation April 1, 2012 Today’s products require high finishes, burr-free edges, freedom from contamination, and often close tolerances. Electropolishing provides all of those conditions and more in a matter of seconds for many metal parts. It is a process that has been used for more than a hundred years. It is widely known and the science is widely discussed, but its ability to run job shop lots and high-precision high-volume parts in the same equipment makes it a bit unique.
Metal Parts Follow Tough Plastics Act April 1, 2010 When you walk into the Redeye On Demand facility in Eden Prairie, MN, you enter into one version of the factory of the future. There you will see a bank of 100 high-end Fortus fused-deposition modeling (FDM) machines from Stratasys that provide the capacity to build real, functional parts with production-grade thermoplastics directly from CAD data.
Drill/Tap Centers Take to Milling August 1, 2009 It is reported that, not too long ago, before the current precipitous decline in machine-tool shipments, the number of 30-taper machines that were being manufactured and sold in Japan had surpassed the numbers of 40-taper and 50-taper machining centers.
Deburring in Forming and Fabricating: Part 2 June 18, 2020 Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce deburring costs in forming and fabrication operations, such as improving product design; preventing burrs; minimizing burr properties; and removing burrs during the main fab process. Also discussed are how shops can determine if deburring or edge finishing is needed, and how they can choose among the 124 different deburring processes.
Spotlight on Welding with AWS April 24, 2020 April is National Welding Month and exciting things are happening within the industry. In this podcast, Chris Mahar, Associate Editor of Manufacturing Engineering magazine, talks with Monica Pfarr, Executive Director of the American Welding Society Foundation about what’s happening in the industry and what AWS is doing to celebrate. From the industry as a whole to the current market temperature and the workforce, this podcast is a welding one-stop-shop.
Pushing the Envelope with Pallets and Robots May 24, 2022 The range and requirements of flexible machining cells are increasing.
Tech-Enabled Manufacturing Soars in Polk County February 16, 2022 As manufacturing continues to return to the United States, Polk County plays a key role in attracting new companies to the area, offering reasonably priced land, tax incentives and a strong talent pipeline – all in a location where people want to live.