Displaying 71-80 of 837 results for

Because it is a production cost, reducing the need for deburring can help the bottom line. In this podcast, part two of two, Alan Rooks, Editor in Chief of Manufacturing Engineering magazine, talks with Dr. LaRoux Gillespie, a researcher, engineer, manager, consultant, and writer with an extensive knowledge base on deburring and finishing. In this episode, the discussion focuses on ways to reduce deburring costs in forming and fabrication operations, such as improving product design; preventing burrs; minimizing burr properties; and removing burrs during the main fab process. Also discussed are how shops can determine if deburring or edge finishing is needed, and how they can choose among the 124 different deburring processes.

April is National Welding Month and exciting things are happening within the industry. In this podcast, Chris Mahar, Associate Editor of Manufacturing Engineering magazine, talks with Monica Pfarr, Executive Director of the American Welding Society Foundation about what’s happening in the industry and what AWS is doing to celebrate. From the industry as a whole to the current market temperature and the workforce, this podcast is a welding one-stop-shop.

So you’ve heard all sorts of good things about Swiss-style, sliding headstock CNC lathes and have been thinking about investing in one.

Swiss-style machine tools can be a good choice for making complex parts. On the downside, however, Swiss machining itself has a reputation of being complex—and, therefore, more difficult to master than standard machining.

Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.

Celebrating its 80th year, Kennametal, the Latrobe, (PA), tooling manufacturer, says it has solved the age-long problem of tool stability when drilling in deep cavities, alongside tall shoulders, and past bulky fixtures. Reaching deep inside a workpiece to drill holes can be challenging.

Many job shops hold onto traditional, inexpensive tooling systems. ER collets and Weldon flats are tried and true; they work and are proven. At the same time, newer, advanced machining technology, such as multi-axis machines, may perform better when newer, advanced (and more expensive) toolholders are deployed.

In auto racing, small details have a major impact on success—a concept very familiar to performance racing parts provider Oliver Racing Parts (Charlevoix, MI). Oliver produces performance connecting rods for the world’s leading engine builders.

In a perfect CNC world, the first part is always a good one. There’s no need for extra blanks or barstock. Setup times are only as long as is needed to swap out a few tools and load a new program. There’s never a crash, never the need to reprogram an inefficient bit of code. The operator just pushes the green button and out pops a finished workpiece minutes or hours later.

GF Machining Solutions (GFMS) celebrated the grand opening of its new 21,000 ft²  (1950 m²) Aerospace and Energy Center of Competence in Huntersville, NC (near Charlotte), with a flourish and local dignitaries.