Modern CNCs Make Easy Work Out of Tough Stuff June 27, 2018 It’s the machine tool acronym you never bother to put into words: CNC. And much of the time it’s probably OK to view your “computer numerical control” as a black box doing magic. But if you’re struggling with high-speed machining, need better surface finishes or higher accuracy, have training and retention problems, or want a better handle on your production efficiency, the answer just might be the latest iterations of those three little letters.
Sunnen Products Company acquires BTA Heller February 2, 2018 Sunnen Products Company has acquired BTA Heller Incorporated, a US-based manufacturer of deep hole tooling and systems for primary hole generation. This move aims to expand Sunnen’s honing expertise to include tooling for initial hole creation and other complementary bore sizing and finishing processes.
High-Torque Retention Knob Gives Job Shop Spindles The Competitive Edge April 25, 2018 Despite the addition of more than 750,000 CNC mills in the past 15 years in the US, CNC machining job shops often hover at the bottom of the totem pole, where there’s little room for error as most bids are won by a 1–2% price variance.
How Small Shops Can Go Digital — Economically! April 4, 2018 In the early days at CNC Software, we saw that our Mastercam CAD/CAM system was only part of a larger manufacturing solution and that an open architecture foundation could allow seamless data communication with complementary devices and systems across the shop floor.
Technology Tailored to Shop’s Machining Needs May 2, 2017 You don’t have to look too far to find tooling presetters that fit the machining requirements of just about any size shop. The value of off-line tool presetting—rather than stopping machine spindles to touch off tools as machines sit idle—continues to prove itself invaluable, especially to the smallest first-time user shops.
Know Your Metals: Aluminum March 31, 2021 Aluminum and its alloys are highly popular in the machining industry for many reasons. Did you know it is the most abundant metal on Earth?
Sandvik Coromant Announces Metalcutting Collaboration with Autodesk December 3, 2020 Sandvik Coromant has announced a new partnership with Autodesk. The collaboration was officially announced on November 17, 2020 at Autodesk University 2020 — an online conference for design and manufacturing.
Toolpath Simulation, Optimization Boosts Part Manufacturing for Fixtures February 2, 2021 Those who manufacture precision workholding systems have the same goals and challenges as the machinists who use them. Both groups strive to reduce setup times and optimize cutting cycles. Secure, consistent, and accurate gripping is paramount.
New Cutter Bodies Boost Feed Rates, Lower Cycle Times on Very Large Parts January 28, 2021 A few years ago, two companies joined forces to greatly enhance productivity in heavy milling and crankshaft machining. Their combined efforts resulted in solutions to improve throughput and reduce costs by a factor of four in some cases.
The Sharpest Tool in the Box January 21, 2021 The word “reconditioned” can ignite visions of worn, overworked products inferior to new ones. The reality is as long as you purchase from a reputable supplier, reconditioned cutting tools will deliver the same consistent results as they did upon initial purchase.