Micro Cutting Tool Options Expand as Applications Increase May 2, 2018 Solid-carbide micro cutting tools about the diameter of human hair or smaller—some producing parts visible only under a microscope—are making a huge impact on manufacturing highly advanced electronics, automotive and aerospace fuel injection systems, and medical instruments and implants.
Big, Heavy, Awkward Parts Need Workholding, Too April 23, 2018 If you’ve ever seen industrial wind turbine components on the back of a flatbed truck rolling down the highway, you have a good idea of what a large, heavy, difficult-to-handle workpiece is. For example, with a single blade on the GE 1.5 mW turbine being almost as long as a football field, the entire blade assembly weighs about the same as 36 small cars.
Workholding Solutions to Reduce Costs, Increase Throughput April 24, 2018 At the Nirvana Machine Shop on planet Perfection, every workpiece is clamped to a custom-built fixture mounted on a dedicated machine tool. Each workpiece is dimensionally identical to the one before and the one after. All the fixtures are totally automatic—instantly positioning, clamping, machining, inspecting, and releasing the part with the ultimate precision.
Sorting Out the Options Leads to Successful Presetting November 2, 2018 With the number of offline and in-process toolsetting options on the rise, developing a way to efficiently utilize this technology can be confusing. Which presetter should we buy? What about the software that’s so often part of these systems—do we really need it?
Advanced Cutting Tools Rev Up Milling Operations November 5, 2018 Do you have what it takes to raise your milling productivity to the next level? In addition to the requisite know-how, you need cutters and machine tools that will allow you to employ milling techniques that exceed what’s normally possible. Aided by the right hardware, you may soon be performing feats like pushing your feed rates to new highs and cutting harder materials than ever before.
A Supermarket for Tooling and Workholding November 5, 2018 If you’re looking for new solutions to tooling and workholding challenges, IMTS was a great place to start. The bi-annual trade show, held this past September in Chicago, allowed shops to browse for the “latest and greatest” technologies.
Superabrasive Wheels Reinforce Outstanding Results for Cutting Tool Manufacturers October 25, 2018 For today’s industrial cutting tool manufacturers there is a continuous and increasing demand for faster cycle times, better asset utilization, tighter tolerances and improved quality. Running a successful manufacturing facility takes more than acquiring the latest state- of-the-art equipment and the most advanced grinding technology.
Laser Scanners Demand Attention as Technology Improves October 7, 2019 Metrology-grade laser scanners are expanding their range of applications. New users are finding the main attractions of laser scanners—speed and ease of use. What prevented more widespread use in the past were laser scanners’ perceived tradeoffs. Using one usually meant sacrificing accuracy or working with noisy data.
5 Books for Tool & Die Makers October 14, 2019 Machinists and toolmakers are often confused for one another. Their expertise and job descriptions might seem similar to an outsider, but as Practical Machinist’s forum members like to point out, there is a significant difference between them.
Blaser Swisslube Raises Funds for National Robotics League October 21, 2019 From November 1 to December 31, 2019, Blaser will donate $500 to the National Robotics League (NRL) on behalf of each National Tooling and Machining Association (NTMA) member company placing their first order for one or more drums of Blaser metalworking fluids.
