SME Logo

SME Certification header

Certification Oversight & Appeals Committee


Each certification program has an oversight body comprised of no fewer than five practitioners and subject matter experts from industry and academia. The committee evaluates certification exam performance on a yearly basis making sure that each item is performing accurately. They are responsible for responding to all requests for certification appeals. The oversight body also ensures that candidates are offered proper tools they need while preparing for the examinations, and makes recommendations for the development of said tools.

Chair
Chad Vincent Chad Vincent, LSC
American Railcar Industries
Member at Large


Chad Vincent is the director of lean manufacturing for American Railcar Industries (ARI) in Saint Charles, Missouri where he leads the Lean Enterprise Program for the organization. Prior to ARI, he worked as a lean specialist in the industrial packaging industry, as a quality engineer in the medical device manufacturing industry, as a project engineer in the construction industry, and was in management in the logistics and transportation industry. Vincent earned a B.S. in engineering management specializing in quality engineering from the Missouri University of Science and Technology. He is a senior member of SME, and is Past-Treasurer for the ASQ Lean Enterprise Division. He is a Certified Quality Engineer (CQE), Certified Reliability Engineer (CRE), Certified Manager of Quality/Operational Excellence (CMQ/OE), Certified Six Sigma Black Belt (CSSBB), and is Lean Bronze Certified (LBC), Lean Silver Certified (LSC) and Lean Gold Certified (LGC). Vincent has also served as a senior lead examiner and judge for Arkansas's Governor's Quality Award and is past president for the Leadership Arkansas Alumni Association board of directors. Vincent is passionate about lean as the pathway for organizational cultural transformation. He routinely supports various organizations as a presenter for conferences and as an author and reviewer for publications related to lean topics. He is the co-editor of The Lean Handbook: A Guide to the Bronze Certification Body of Knowledge.

 

Additive Manufacturing Certification Oversight and Appeals Committee

 
Members
Brad McConnell Brad McConnell, CAM-F
Eastern Iowa Community College


Brad has been a faculty member at Eastern Iowa Community Colleges since 1988. He has a technical AAS degree in Mechanical Design and Drafting as well as a CAM-F (Certified Additive Manufacturing - Fundamentals) certification. As a faculty member his teaching responsibilities include drafting, GD&T, computer fundamentals, solid modeling and additive manufacturing courses. He is a CSWA for SolidWorks and has taught Autodesk Inventor and PTC Pro Engineer-Wildfire-Creo.

Brad first became involved with AM/3d printing in 2002 with a Z-corp machine. His additive experience now has grown into hands on application and operation of low cost FDM machines as well as large commercial FDM machines, several models of SLA, and some basic DMLS. His experience also includes 3D scanning. Brad is currently in the process of developing an “Additive Manufacturing” degree program. Although still a full time faculty member Brad has spent the last two summers working at the John Deere, Manufacturing Technology Innovation Center located in Moline, Illinois.

 

Charles Gilman Charles Gilman
Self-Employed Consultant


Charles Gilman has been working in Additive Manufacturing for 25 years. Prior to his current role, Mr. Gilman held positions with GE Global Research’s Model-Based Manufacturing Laboratory, the US Air Force Manufacturing Technology Directorate, Rensselaer Polytechnic Institute, and STEP Tools, Inc. Mr. Gilman’s technical interests also include Computational Geometry, Model-Based Manufacturing, and Smart Manufacturing.

 

Clayton McIntyre Clayton McIntyre, CAM-F
General Atomics – ASI


Clayton McIntyre is an Additive Manufacturing Specialist at General Atomics Aeronautical Systems Inc. He has experience with manufacturing development of SLS and Material Jetting technologies and 6 years of design experience for SLS, Material Jetting, and FDM technologies. His primary task is developing, leading, and overseeing SLS production efforts. He has established the controlling documentation, operational standards and training material for SLS. Clayton is also a member of the AM Tiger Team which has been tasked with guiding the overall Manufacturing’s adoption of Additive Manufacturing.

While at Cognionics, he grew the 3D Printing capacity in both production and prototyping, developed process parameters, established supplier contacts, and presided over 18,000 hours of machine runtime.

In 2015, Clayton was fortunate enough to be the 3D Print designer for San Diego Model Railroad Museum’s Centennial Railway Garden, a scaled replica of Balboa Park. Clayton deigned the decorative facades to be 3D Printed on desktop FDM machines.

 

Farhad Ghadamli Farhad Ghadamli, CAM-F
Eaton Corporate and Research Technology Polymer and Nanocomposite Group


Farhad Ghadamli is a mechanical engineer working with the Eaton Corporate and Research Technology -Polymer and Nanocomposite group in Southfield, MI and before that he working with Eaton Additive Manufacturing Center of Excellence. He has a master's and a bachelor's of science in mechanical engineering from the University of California, Davis. He has work experiences with two of the 3D printer manufacturer startups Carbon and Desktop Metal. In 2013, he started the SME student chapter at UC Davis and soon he led the Additive Manufacturing competition sponsored by Sandia National Labs, Livermore. Under this initiative, he was able to lay the foundation for the Solar Car team at UC Davis. Soon, he was recognized as one of 2015 SME 30 under 30 Future Manufacturing Leader.

 

Khalid Rafi Khalid Rafi, CAM-F
UL


Khalid Rafi is a Lead Development Engineer for Additive Manufacturing/3D printing at UL. He has more than 17 years of experience in R&D and engineering education. His responsibilities in UL includes developing materials and process validation/certification program, master trainer for AM education, content development for AM training and education, and providing advisory services to industry for the adoption of 3D printing technology. Rafi serves as a member on the technical committees for international standards development such as ASTM F42/ISO TC261, and ASME. He also serves as a reviewer for many international technical journals related to materials and manufacturing. He is a SME Certified Additive Manufacturing Professional (Certified Additive Manufacturing – Fundamentals).

Rafi holds a PhD and Master’s degree in Metallurgical and Materials Engineering from Indian Institute of Technology Madras (IITM), and Post-Doctoral fellowships from University of Louisville, USA, and Nanyang Technological University, Singapore. Rafi has hands-on experience on multiple additive manufacturing technologies comprising both metal and polymers.

 

Pamela Waterman Pamela Waterman, CAM-F


Pam Waterman has been involved in the field of additive manufacturing (AM) for more than 20 years as a Contributing Editor for Digital Engineering magazine and contributing author for several editions of Wohler’s Report: 3D Printing and AM State of the Industry. Previously she served on the SME Rapid Prototyping committee and was one of the first members to earn what was then called the certified Rapid Prototyping Professional designation. Having worked as a manufacturing engineer for Raytheon and MITRE in radar and satellite communications, she is returning to hands-on engineering in 3D printing. She has experience with part design and production on Stratasys, Form labs, Objet, Markforged and Flashforge systems, and has recently obtained her SME Additive Manufacturing Fundamentals Certification. Her undergraduate degree is in astrophysics from UMass Amherst, and she has a master’s in radio astronomy/microwave engineering from U of M Michigan Ann Arbor.

 

Certified Manufacturing Technologist (CMfgT) and Certified Manufacturing Engineer (CMfgE) Committee

 
Chair
Philip Rufe Philip Rufe, CMfgE
Eastern Michigan University


Mr. Rufe has been a faculty member at Eastern Michigan University since 1990 He holds degrees in education, manufacturing, and mechanical engineering and is a Certified Manufacturing Engineer and Registered Patent Agent. Mr. Rufe has taught courses in manufacturing processes, industrial operations, drafting, mechanics, geometric dimensioning and tolerancing, lean manufacturing, intellectual property, and design for manufacture and assembly. He has taught industrial seminars in design for manufacture and assembly, geometric dimensioning and tolerancing, and dimensional metrology. Mr. Rufe has also taught both the Fundamentals of Manufacturing Review course and the Manufacturing Engineering Review course for SME at various locations across the country. He is the editor of the Fundamentals of Manufacturing, 3rd ed. and author of the Fundamentals of Manufacturing Workbook.

Immediate Past Chair
Rick Kortekaas Rick Kortekaas, CMfgT
Saint Gobain Performance Plastics


Rick Kortekaas is the Engineering Manager at Saint Gobain Performance Plastics. His key experience is driving continuous improvement efforts internally and at suppliers for cost improvement, lean, QMS, DFM/DFA projects to improve total cost and cost of poor quality, project management of capital projects, and facilities layout to convert to CFM. Kortekaas has a background working in electronics, plastics, fabricated metals, motion and controls and has developed a process for new process introductions.

He received his Bachelors of Science in Industrial Technology with a minor in Manufacturing Management from Bemidji State University. Kortekaas is certified as a Certified Manufacturing Technologist, certified in quick response manufacturing, and Certified Production and Inventory Management (CPIM) through APICS.

Members
Thomas M. Binder Thomas Binder, CMfgT, CMfgE
The Boeing Company


Tom Binder is a manufacturing engineer for the Boeing Commercial Airplane Company in Renton, Washington. He is currently assigned to the product development team for the 737 MAX, focusing on build integration of the redesigned jetliner. Binder started his career in the commercial airplane division in 1984 and has worked on 727, 737, 757 and military versions of the 707, 737 and 757 aircraft. Recently, he was a hardware manager for the Boeing Defense and Space group working on the P-8A, a derivative of the commercial 737 for the U.S. Navy. Binder was responsible for manufacturability, supplier coordination, and scheduling of military hardware installed in the forward fuselage.

He is a United States patent holder for Boeing's "Sky Interior" for the 737 and was honored with a 2012 Boeing Special Invention Award for this patent. Binder has achieved both the Certified Manufacturing Engineer and Certified Manufacturing Technologist certifications from SME and is a member of the Boeing SME steering team. He is also a Certified Master Automotive Technician – National Institute for Automotive Service Excellence.

Binder received his B.S. in Mechanical Engineering Technology from Purdue University and holds a Certificate in Product Lifecycle Management from Purdue University and an Associate's Certificate in Project Management from George Washington University.

 

Kathryn Daniels Kathryn Daniels, PhD, LSME, CMfgE
Tri-Phase Engineering


Kathryn Daniels has 30 plus years aircraft experience in tool and die making, tool engineering, and programming. CATIA V5, quality engineer and quality management. (AS9100, AS9102) Adjunct teaching in engineering, quality and lean manufacturing related topics at Wichita Area Technical College, Butler Community College, Pittsburg State University and Wichita State University. Past SME experience is: Certification Committee, (9 yrs.), Chapter 52 Wichita, Ks activities include: Certification Chair, 11 years, Vice Chair (3 yrs.), Chairman, (3 yrs.), Advisor to Wichita State University Student Chapter (4 yrs.). Currently, serving as Chair and Certification Chair for Wichita Ks chapter, and assisting students at Wichita State University. Other professional affiliations are: Senior member, Society of Manufacturing Engineers, Senior Member American Society of Quality, Member of American Society of Mechanical Engineers, Society of Women Engineers and American Society of Engineering Education. B.S. Manufacturing Technology and B.S. Business Quality Management Southwestern College, M.S. Technical Education Pittsburg State University, Ed.S Industrial Education Pittsburg State University, and PhD Industrial Engineering University of Berkeley. Currently, owns Tri-Phase Engineering, where most work is engineering design for the military.

 

Patrick Ferro Pat Ferro, PhD, CMfgE, PE
Gonzaga University


Patrick Ferro is a professor of mechanical engineering at Gonzaga University and has twelve years of process engineering experience in the investment casting, silicon wafer, and alternative energy technology industries. He has fifteen years of experience as an engineering educator, providing instruction on materials and manufacturing. Ferro has research interests in hydrogen storage and hydrogen embrittlement. He has also been a materials consultant since 2000. He received his B.S. in materials science and engineering at Cornell University in Ithaca, New York. At Oregon Graduate Center in Beaverton, Oregon, he received his M.S. in materials science and engineering and he received his PhD in metallurgical and materials engineering at Colorado School of Mines in Golden, Colorado. Ferro has also achieved his professional engineer (PE) license in Michigan, Ohio and Washington and is certified through SME as a Certified Manufacturing Engineer.

 

Charles Gates, Jr. Charles Gates, Jr., CMfgE, CQE, CMQ, CSQP
Retired, Caterpillar


Charles Gates has 40 years of work experience with Caterpillar Inc. as a division manager, which included global managerial responsibilities for product design, manufacturing engineering, quality engineering, six sigma, lean, factory operations, training, and management development. He has over 30 years of teaching experience as an adjunct professor teaching a wide variety of technical and professional courses at the graduate level. Gates is an active board member for SME Chapter 5 in Chicago, the ASQ Fox Valley Section, and the APICS Fox River Chapter. He has been an active SME member for over 40 years and is an SME Lifetime Member.

Gates holds a Certified Manufacturing Engineer (CMfgE), Certified Quality Engineer (CQE), Certified Manager of Quality (CMQ), Certified Supplier Quality Professional (CSQP). He received the Olivet Nazarene University Excellence in Teaching Award and is a Master Certification Instructor. Gates holds an M.S. in industrial technology from Purdue University, a B.S. in management from the University of Illinois, an A.A.S from Illinois Central College, and a four-year machinist apprentice credential from Caterpillar Inc.

 

Steve Piotrowski Steve Piotrowski, CMfgT, CMfgE


Steve Piotrowski has been actively involved with manufacturing for over 20 years and is currently a project engineer with responsibilities ranging from concept through completion at Craftsmen Industries, a manufacturer of mobile marketing platforms and more. Craftsmen is the manufacturer of what has been referred to as “Transformers” – like the movie where there is much more than what you see with your eyes. We have quick-turn, large manufacturing capabilities where short lead times and fixed due dates are the norm. Many times, the project is minimally defined, as we do what has likely not been done before. Although we have many repeat customers, we have very few repeat deliverables. Prior to joining Craftsmen he was supporting customers in the nuclear industry while a member of the Pentair team. Working with welder qualifications, documentation, innovations with new product capabilities, cost reductions and capital expansion projects. Steve also worked for nearly 14 years with United Defense / BAE Systems as a manufacturing engineer. Projects ranged from large weldments, facility layouts, floor space reductions, facility relocations, international product line start-ups, product testing, field service, and new product development. Steve has been a member of SME since 2001, has a B.S. in industrial technology with a concentration in manufacturing engineering from the University of Wisconsin-Stout and is certified through SME as a Certified Manufacturing Technologist as well as a Certified Manufacturing Engineer. He also holds certifications from the American Welding Society as an AWS Certified Weld Inspector (CWI).

 

Lean Certification Committee

“Promote and maintain the leading global LEAN Certification, which enables individual development and business success.”

The Lean Certification Oversight and Appeals Committee is made up of industry leaders whose diverse backgrounds represent years of lean experience. The Lean Certification Alliance — Association for Manufacturing Excellence (AME), Shingo Institute, and SME — works to appoint lean practitioners to the committee. The Lean Certification and Oversight Appeals Committee plays a critical role in administering the Lean Certification program.

Chair
Marian Anton Lemne Marian Anton Lemne, LGC
Director of Global Sales, Inventory and Operations Planning – Cameron, a Schlumberger Company
Shingo Representative


Marian Anton Lemne is currently the Director of Global Sales, Inventory and Operations Planning (SIOP) and has held this position at Cameron, a Schlumberger Company, since February 2016. In his role as Director of Global SIOP, Marian has global oversight of Surface Global SIOP strategy and operating model including global strategy on inventory acquisition and inventory utilization. He has collaborated across multiple divisions on the design and implementation of a centralized global supply chain.

In 2008, Marian joined Cameron’s Surface Systems division as Plant Manager and was instrumental in driving strong Operational Performance and Customer Engagement at two “state of the art” manufacturing facilities. In 2011, Marian was appointed Manager of Global Strategic Sourcing for Surface Systems and, later in 2013, was appointed Director of Global Supply Chain with responsibility across all Surface business worldwide.

Before joining Cameron - Surface Systems as Plant Manager in 2008, Marian held the position of Lean Methods Team Leader for Husky IMS in Canada. Between 2001 and 2006, Marian held leadership positions as Plant Manager with ThyssenKrupp Northern Elevator, Quality Manager and Engineering Project Manager at Concord Elevator in Brampton, ON, Canada.

Marian brings a wealth of global experience in Sales, Inventory and Operations management, Global Category Management and Sourcing, Lean Manufacturing, Engineering, Project Management and Quality Management. Marian is Lean Gold Certified by the Lean Strategic Alliance, trained on Shingo Model and Certified Supply Chain Professional (CSCP) from APICS. Marian also holds a Professional Engineer (P.Eng.) license from Professional Engineers Ontario (PEO) and a Professional Project Professional (PMP) designation from PMI.

Marian earned an Executive MBA from the WU University of Business and Economics in Vienna, Austria and a Bachelor of Science in Mechanical Engineering from Gh. Asachi Polytechnic Institute in Iasi, Romania.

Co-Chair
Stephen Lehocky Stephen Lehocky, LBC
SME Representative


Stephen Lehocky has more than 35 years of leadership experience, with a solid background in domestic and international operations excellence. He has deployed lean and six sigma methodologies in manufacturing, engineering, healthcare, service, and transportation industries.

Among his recent achievements, Mr. Lehocky is the Manufacturing Manager at OraMetrix, a medical device manufacturer. Previously he was the Vice President of Operation Excellence practice at TransSolutions implementing lean in the US and Australia. While at the George Group, Accenture, and CPS consulting firms, he was the Lead Master Black Belt and lean instructor for the US Army’s Lean Six Sigma program office as well as supporting the US Postal Service and the FAA. During his tenure with TEREX Mining Americas, Mr. Lehocky was instrumental in the development and implementation of lean principles and tools in manufacturing plants in the US, Mexico, Germany, England, and Ireland. He was the Divisional Quality Manager for Jostens’ Jewelry Division implementing six sigma practices at the plant level. He successfully built from scratch the company’s quality department and implemented six sigma across three plants. Mr. Lehocky has also provided expertise in lean and six sigma to notable firms such as Black and Decker, Boeing Satellite Systems, and Hughes Space and Communications.

Mr. Lehocky earned his Bachelor of Science degree in Mechanical Engineering from the University of Illinois and his MBA at California State University Dominguez Hills. He is presently pursuing his Ph.D. in Industrial Engineering at the University of Texas Arlington with a focus on Human Factors Engineering. He holds certifications in Lean Bronze, Six Sigma Lean Master Black Belt, Manager of Quality/Organizational Excellence, Quality Engineer, Reliability Engineer, Quality Auditor and Software Quality Engineer.

He is active with state and national quality programs serving on the Board of Examiners as a team member, team leader scorebook editor, process coach, and judge for the Texas Award for Performance Excellence. In addition, Mr. Lehocky is a Civil Air Patrol Captain and a licensed single-engine private pilot. He is a member of Society of Manufacturing Engineers, American Society for Quality, Association for Manufacturing Excellence, and the Institute of Industrial Engineers.

Immediate Past Chair
Chad Vincent Chad Vincent, LSC
American Railcar Industries
Member at Large


Chad Vincent is the director of lean manufacturing for American Railcar Industries (ARI) in Saint Charles, Missouri where he leads the Lean Enterprise Program for the organization. Prior to ARI, he worked as a lean specialist in the industrial packaging industry, as a quality engineer in the medical device manufacturing industry, as a project engineer in the construction industry, and was in management in the logistics and transportation industry. Vincent earned a B.S. in engineering management specializing in quality engineering from the Missouri University of Science and Technology. He is a senior member of SME, and is Past-Treasurer for the ASQ Lean Enterprise Division. He is a Certified Quality Engineer (CQE), Certified Reliability Engineer (CRE), Certified Manager of Quality/Operational Excellence (CMQ/OE), Certified Six Sigma Black Belt (CSSBB), and is Lean Bronze Certified (LBC), Lean Silver Certified (LSC) and Lean Gold Certified (LGC). Vincent has also served as a senior lead examiner and judge for Arkansas's Governor's Quality Award and is past president for the Leadership Arkansas Alumni Association board of directors. Vincent is passionate about lean as the pathway for organizational cultural transformation. He routinely supports various organizations as a presenter for conferences and as an author and reviewer for publications related to lean topics. He is the co-editor of The Lean Handbook: A Guide to the Bronze Certification Body of Knowledge.

Members
Larry G. Anderson Larry G. Anderson, LGC
President, Southwest Region
Association for Manufacturing Excellence
Shingo Institute Representative


Larry Anderson is Lean Gold Certified and a lean senior management and training professional with over 40 years of experience. He has a strong lean manufacturing and improvement background that includes a variety of functional experience. He serves as a senior examiner/team lead for both the Shingo Prize for Operational Excellence and the AME Excellence Award. He is certified by the Shingo Institute to facilitate all institute workshops, is past chair of the Lean Certification Oversight and Appeals Committee, and serves as President of the Southwest Region of the Association for Manufacturing Excellence. Anderson pursued the Masters in Engineering Management at the University of Louisville and holds a BSME from Texas Tech University. He is a Registered Professional Engineer in Texas and Kentucky.

 

Joanne E. M. Deys Joanne E. M. Deys
VP Global Sales and Operation Planning
Stanley Black and Decker - SEF
Shingo Representative


Joanne E. M. Deys is president of Brightside Alliance LLC, a consultancy based in Rochester, Michigan that specializes in lean business and leadership development, lean implementation, and cultural transformation through the understanding of principles and execution of concepts and tools. She focuses not only on identifying the opportunities, but also developing the infrastructure and skills for long term success on the journey for her clients. Before consulting, Deys was the vice president of integrated supply chain at Kautex, Textron and was based in Germany. During her previous 26 years in industry she held leadership roles in manufacturing, engineering, labor relations, operations management, change management, production control, logistics, and materials management. Her working history has gained her experience in a range of industries including, aerospace, automotive, electronics, fire and safety, oil and gas, pharmaceutical and biotech, and others. She is on the Shingo Institute Examiners Committee and has been a certified Examiner/Lead Examiner for the Shingo Prize for Operations Excellence since 2007. Receiving her B.S. in Industrial Technology from the State University College at Buffalo, Deys also holds a Harvard Business Micro MBA certificate from SUNY Buffalo, and an Executive Leadership Program Certificate from Thunderbird School of Global Management.

 

Richard Evans Richard Evans, LBC
Lean Coach / President, and TWI Certified JI and JR Instructor
JR Lean
AME Representative


Richard has spent the past 50 years helping companies become more effective in delivering quality and value to the production process, whilst focusing on customer success. Having a manufacturing engineering background, Richard mentors and coaches Leaders to recognize waste, and apply Lean Principles, Tools and Techniques. His extensive knowledge of multiple industries, enable him to quickly focus in on opportunities for improvement. As an approved Lean Bronze Review Course trainer for SME, Richard is able to coach teams to increase ‘value added’ content to a maximum.

Richard has held various positions in industry from Manufacturing Engineering Director, to Director, Lean Enterprise. During the past decade Richard has assisted companies in developing Lean Transformations through Executive Mentoring and has facilitated over 80 Kaizen events.

Richard is President of the Canadian Board of AME (The Association for Manufacturing Excellence) and was past Program Chair for National and Regional Lean Conferences since 2007 and sits on the AME Excellence Awards Council. He is a current member and Past Chair of the Lean Certification Oversight and Appeals Committee responsible for developing the Bronze, Silver and Gold Lean Certification Program for SME, AME, and The Shingo Institute. Richard is also a Certified TWI Job Instructions and Job Relations Trainer.

 

Jeff Fuchs Jeff Fuchs, LBC
President, Neovista Consulting LLC
Director, The Maryland World Class Consortia
SME Representative


Jeff Fuchs is president of Neovista Consulting LLC, a consultancy based in Baltimore, Maryland specializing in lean implementation, leadership development, and cultural transformation. Since 1997, Fuchs has worked with companies in a range of industries, including aerospace, textiles, pharmaceuticals and biotech, energy, consumer products and others. Prior to his consulting career, Fuchs held engineering, quality and production leadership roles in the aerospace and automotive fields. He has been a part of the development and rollout of the Lean Certification standard since its early inception in 2006. Since 2008, Fuchs has served as director of The Maryland World Class Consortia, a collaboration of 49 member companies sharing a common interest in using lean techniques to strengthen the economy and deliver business results. He is the representative of The Shingo Prize for Operational Excellence in the state of Maryland and has been a lead examiner for The Shingo Institute since 2007. Fuchs received his B.S. in aerospace engineering from West Point.

 

Thomas Hartman Thomas Hartman
Executive Coach, Catalysis Inc.
Catalysis Representative


Thomas Hartman is an Executive Coach for Catalysis Inc. (formerly known as the Thedacare Center for Healthcare Value). With over 30 years of experience on the Lean Journey, he teaches, mentors, and coaches healthcare executives to become Lean leaders, enabling them to radically improve throughput, quality and cost.

Tom spent 19 years as a senior executive with Autoliv, the world’s largest producer of automotive safety products. He was the driving force behind the establishment of Autoliv’s AME and Shingo Prize winning Lean culture, based on the Toyota Production System and culture.

For 8 years, Tom was President of Autoliv’s global Airbag Inflator Division. With annual sales of $850 million Autoliv Inflators led the world in market share and product quality under his leadership. He co-founded Autoliv’s Lean Consulting group which shared Autoliv’s Culture of Continuous Improvement with over 100 companies.

Since 2005, Tom has served as a member of the Shingo Institute Board of Governors. He was inducted into the Shingo Academy in 2010 and the AME Hall of Fame in 2013. Tom has also served on advisory boards for Economic Development, Healthcare, and Manufacturing organizations.

 

Ruben Mellado Ruben Mellado, LSC
Production Manager, Layfield Environmental
AME Representative


Ruben Mellado is the Production Manager at Layfield Environmental, a vertically integrated company with extrusion plants in Vancouver and fabrication facilities in Edmonton, Toronto, and San Diego. Ruben is a member of the Steering Committee to drive enterprise excellence in the company. Ruben has more than 30 years of experience in the plastic industry with a focus on geosynthetic products and strong knowledge of plastic welding techniques and equipment such as radio frequency, hot air, wedge, and impulse welding. His work experience started in South America, in countries such as Peru, Brazil and Chile, and in 2005 he moved to Canada. Ruben Mellado is an Industrial Engineer with a Master’s degree in Science and has a Lean Silver Certification. As a volunteer, he served as a member of the board of Examiners at the Association of Professional Engineers in Alberta and is currently part of the Board of AME Canada. Through the years, Ruben has learned that understanding how humans individually and collectively react to change plays a big role in successfully implementing any continuous improvement initiative.

 

Bruce Patch Bruce Patch, LBC, LSC
Pinnacol Assurance
SME Representative


Bruce comes from a diverse career background. After receiving his BS in Architectural Engineering at the University of Colorado, Boulder, he entered the US Air Force as a career officer and instructor pilot. He received his Masters of Public Administration from Drake University, in Des Moines, while on assignment to the Iowa Air National Guard. Bruce was first exposed to lean as the Quality Assurance Officer at the Arizona Air National Guard, when he was asked to improve the lead time to inspect and rebuild the unit aircraft. Having been bitten by the lean bug, he pursued training and experiences through the Air Force Smart Operations for the 21st Century program, built primarily on lean concepts. His experiences there exposed him to maintenance, recruiting and medical operations improvements. Bruce holds an FAA Commercial and instrument rating. He currently flies sailplanes near his home in Boulder, CO.

After retiring from the Air Force, Bruce joined the VA as a Management Analyst to help find efficiencies in claims processing and disability ratings. During his time with the VA, Bruce earned his Lean Bronze Certificate. Bruce then went on to join the National Renewable Energy Laboratory, helping them to support research through more efficient and effective processes. With the value stream work being done there, Bruce earned his Lean Silver Certification. Today, Bruce is a Continuous Improvement Coach for Pinnacol Assurance. Pinnacol is a Workers Compensation insurance provider in the state of Colorado. His work includes training and coaching individuals at all levels of the company. He is also involved in helping to take Pinnacol to the next level as part of their lean transformation. Bruce is excited about joining the Certification Oversight and Appeals committee.

 

Beth Reid Beth Reid, LBC
Lead Auditor
Five Stones Research Corporation
AME Representative


Beth Reid is currently a Lead Auditor for the Redstone Test Center for the Department of the Army. Previously, she was the Manager of Operational Excellence for NTS (National Technical Systems) based in Huntsville, AL. She has over 11 years’ experience directing, facilitating and managing numerous Continuous Process Improvement projects, utilizing Lean and Six Sigma methodologies for complex strategic programs within the defense and service industries. She holds a Bachelor's of Science in Business Administration and a Master of Business Administration with a concentration in Management. In her current role, Beth is responsible for all Auditing within 3 divisions for the US Army Missile Defense Programs. From 2013 through 2016, she was a sitting board member for the Alliance, (SME, AME and Shingo) on the Oversight and Appeals Committee for the Lean Certification Exam Process. She is also a member of the AME, SME and ISEE.