SME Logo

About SME



 

Combining Wet-Chemical Coating Processes with Laser Functionalizing

Share this

AACHEN, Germany, March 25, 2013 — Temperature-sensitive substrates are as well involved in the trend to become more functionalities. A new research shows a good way realizing this by keeping energy efficiency and a high degree of flexibility for a gentle processing.

 Fraunhofer (3-28-13)

Conductor paths on glass substrate. Photo courtesy Fraunhofer ILT

Whether it is transparent conductive layers, conductor paths on semiconductors, anti-reflective surfaces on displays, self-cleaning layers on highly transparent glass, or corrosion, scratch and wear protection layers on components subject to high mechanical stress: in almost every area of industrial manufacturing, there is a great need for functional layers to optimize the surface properties of all sorts of components.

Today are just high cost processes in use
Industrially established processes for the production of high-performance coatings tend to employ vacuum coating processes. But these are costly, as they require elaborate systems technology and due to the required batch processing. More affordable processes, such as electroplating or flame spraying, are either applicable only to certain classes of substrate or else display major drawbacks in terms of the layer characteristics they produce. Coating temperature-sensitive substrates is a particularly thorny challenge in this regard.

Energy-efficient coating of temperature-sensitive substrates
Scientists at Fraunhofer ILT, working with industry partners, have succeeded in developing a resource-efficient, laser-based surface functionalization process. This process combines wet-chemical coating processes with a laser process for subsequent functionalizing of the applied material. For example, when coating a glass, plastic or semiconductor substrate, an indium tin oxide (ITO)-nanodispersion is printed onto the component using an inkjet process. Next, a galvo scanner is used to guide a focused laser beam over the surface to be processed.

Laser processing significantly increases the conductivity of the ITO layer, while putting the substrate under far less thermal stress and consuming far less energy than conventional furnace-based coating processes. The new laser-based coating process enables the gentle coating of substrates with a low temperature stability and thereby widens the scope of wet-chemical coating processes significantly.

Locally selective deposition saves on material
Using conventional processes to achieve a locally selective coating of surfaces is not possible or prohibitively expensive in most cases. Functional considerations dictate that any surplus material must be subsequently removed, sometimes using elaborate processes, and this results in an enormous cost disadvantage.

In contrast, the fact that laser processes can be controlled with spatial and temporal precision means they are able to functionalize coating materials in exactly the right places on the component and with no wastage.

Suitability for inline applications
A further challenge in functionalizing surfaces is how to integrate the coating process into existing production lines. Conventional processes for a thermal post-treatment (e.g., furnace-based processes) cannot be easily integrated into production lines at low costs.

Fraunhofer ILT’s laser coating process poses no such problems, because the printing and laser processes it features are ideal for inline applications. This saves manufacturers a huge amount of time and money.

Applications
Fraunhofer ILT’s laser-based coating process can be tailored to meet a wide variety of coating needs. Spatial adaption to the substrate geometry is done by the precise control of the laser intensity distribution. Furthermore the application of pulsed laser beams enables the precise temporal control. Besides creating conductor paths on substrates made of glass, silicon or polymers such as polyethylene terephthalate (PET), it can for instance also be used to apply ceramic corrosion and wear protection layers of zirconium dioxide onto hardened steel. This process is of particular relevance to automotive manufacturing, in which several million components must be coated each year so they can withstand high levels of static and dynamic stress as well as extremes of temperature.

Source: european-coatings.com/, All contents © 2013 by Vincentz Network, Hannover, Germany

###

If you have any questions or comments, please contact SME Public Relations at 313.425.3000, email communications@sme.org or fax: 313.425.3403.