thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

IMTS 2014: Promess Introduces a New Line of Compact Table-Top Servo Press Assembly Stations

 

PRESS RELEASE
Promess Inc.

Brighton, MI, June 24, 2014 – Promess, Inc. will exhibit a new line of standardized compact table-top servo press assembly stations in Booth’s E-5382 and N-6640 at IMTS 2014 in Chicago, IL September 8-13, 2014. Based on the company’s highly successful Electro-Mechanical Assembly Press (EMAP) technology, the new assembly stations will include press capabilities from 1 kN to 12 kN (224.8 to 2,697.7 pounds-force) along with all necessary sensors, controls, software and safety equipment for a virtual turnkey installation.

Designed as an ideal tool for batch assembly operations, the Promess table-top assembly press is an optimum solution for high precision applications such as small valve and electrical/electronic component assembly. Other potential applications include precision joining, join on contact, riveting, testing and measuring, surface checking, press fitting, clipping, and bending.
Table-Top Work Station
“We are convinced that intelligent assembly is one of the key technologies manufacturers will use to remain globally competitive,” said Promess president Glenn Nausley. “By providing a highly flexible standard system, based on proven components and technologies, the servo-press table top assembly station makes it much easier to manage the transition from mechanical, hydraulic, and pneumatic presses to modern digital technology, and to be up and running within 30 minutes after installation.”

Promess’ new table-top assembly stations are all-electric, providing a clean, low-noise working environment free of air and oil leaks. They are also highly energy-efficient because the EMAP only consumes energy during the actual work cycle, unlike hydraulic and pneumatic systems that require constantly running power sources.

The compact design integrates a work area guard door, an easily re-locatable pendant mounted E-Stop button and LED-illuminated work area into a single unit to make optimum use of valuable floorspace. And, the ability to accept input voltages from 120 VAC single phase to 480 VAC three phase allow the assembly station to be located virtually anywhere in most industrial facilities.

The EMAP is a servo motor driven ball screw press with on board force and position monitoring. Because the EMAP is servo driven, the entire system is easily programmed either on or off-line, and easily reconfigured to handle a variety of different parts and/or operations. In-process verification and data acquisition with part traceability capability for part tracking are all standard.

The standard suite of Promess MotionPRO software supports programmable position and force commands to the EMAP. MotionPRO software supports 100 percent in-process verification, real-time force and position monitoring, data acquisition and storage, and part serialization for traceability. The MotionPRO Human Machine Interface is intuitive and exceptionally easy to use.

Promess is a 30-year-old firm that develops, manufactures, and markets its family of sensing devices, electronics, assembly presses and test systems on a global basis.


Published Date : 7/23/2014

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665