thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Rapid & Additive Manufacturing
Share this

Additive Manufacturing Users Group Recognizes Distinguished Service

 

PRESS RELEASE
The Additive Manufacturing Users Group (AMUG)

CHATSWORTH. CALIF., April 21, 2014 – The Additive Manufacturing Users Group (AMUG) announced recipients of awards for excellence and service. The awards were presented at the 26th annual users group conference in Tucson, Arizona.

During the annual Awards Banquet, the association named five DINOs (Distinguished INnovator Operator), an award that recognizes industry veterans for years of experience as well as contributions back to the additive manufacturing industry.
Mark Barfoot (right), AMUG vice-president, receives the DINO Award from Bret Bordner, president.
The newly named dinosaurs are:

  • Mark Barfoot, Hyphen
  • Scott Crump, Stratasys
  • Stewart Davis, CRP USA
  • Jason Dickman, American Precision Prototyping
  • Jim Reitz, Rapid Tech Consulting

Bret Bordner, outgoing president, said, “Without question, this is one of the most prestigious awards in the additive manufacturing industry. While there were many deserving candidates among the hundreds of highly skilled, seasoned veterans that attended the conference, these five men best represent what the DINO Award is all about: excellence and service.”

Barfoot, Davis and Dickman were recognized for their years of service to, and in support of, AMUG as board members, presenters and collaborators. Crump was recognized for his role in establishing the additive manufacturing industry as co-founder of Stratasys and his avid support of AMUG during its transition to a technology-neutral membership. Reitz was recognized for his role in promoting AMUG sponsorship and contributing to the industry as a whole.

Scott Crump (left), Stratasys chairman and chief innovation officer, receives the DINO Award from Kim Killoran, AMUG secretary.Jason Dickman

 

About Additive Manufacturing Users Group (AMUG):

AMUG is an organization that educates and advances the uses and applications of additive manufacturing technologies. AMUG members include all commercial additive manufacturing technologies for companies such as Stratasys, 3D Systems, Concept Laser, SLM Solutions, EOS, and Renishaw. AMUG meets annually to provide a forum for technical presentation on processes and new technologies. This information addresses operation of additive manufacturing equipment and the applications that use the parts they make. Find AMUG online at www.am-ug.com

Stewart Davis  Jim Reitz (right), principal consultant for Rapid Tech Consulting, receives the DINO Award from Mark Abshire, AMUG advisor.

 

 

 

 


Published Date : 4/21/2014

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665