thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

Lathe Chuck Shields

 

The new 52" and 62" steel chuck shields are aimed at lathes or similar machines. These heavy-duty, 12-gauge shields provide a safeguard between individuals and point-of-operation or Lathe Chuck Shieldsrotating hazards, protecting workers from flying chips, sparks, coolant, lubricant, and other particles. The mounting bracket attaches to the face of the headstock. The vertical shield hinges like a door, making it easy to change or adjust the chuck or workpiece. Operators do not need to reach in close to the chuck when opening and closing the shield. The design allows the shield to be hinged either left or right, so the shield can be used on the front or back of the machine to safeguard the chuck. These shields comply with OSHA 29 CFR 1910.212 and the ANSI B11.6 safety standard for lathes.

Danray Products LLC

Ph: 866-482-6807

E-mail: ryan.ebens@danrayproducts.com

Web site: www.danrayproducts.com 


Published Date : 2/7/2014

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665