thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

FABTECH 2013: Press Feed Controls


ProfileSelect control technologies highlight feed control that minimizes electrical and mechanical stress on stamping equipment and material. ProfileSelect uses a sinusoidal profile, (cam motion) providing a smooth motion and material feed, utilizing 100% of the press feed window while putting less stress on all mechanics. The control is ideally suited for progressive die work, when the part’s cosmetics are a factor or when using delicate material.  ProfileSelect controls have an HMI touch screen and come standard on all new Dallas press feeding equipment or can be retrofitted to most existing lines. Two state-of-the-art servo press feeds will be connected to a networking, monitoring and analysis system for communicating to the plant floor while monitoring and analyzing equipment efficiencies and providing reports.

Dallas IndustriesDallas Industries Press Feed Controls
Ph: 248-583-9400
Web site: www.dallasindustries.com 


Published Date : 10/23/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665