thumbnail group

Connect With Us:

Advanced Manufacturing Media eNewsletters

ME Channels / Product Previews
Share this

FABTECH 2013: Air-Actuated Universal Mount Nozzles


Air-actuated, universal-mount nozzle assemblies are available in both T-Tip and atomizing configurations. Universal mounting system allows one nozzle in a multi-nozzle line--not the entire line of nozzles--to be removed for quick-disconnect maintenance and/or replacement. The unique design uses a set screw assembly and mounting slot to affix the nozzle to the line as opposed to the closed-loop guide of other similarly designed nozzles. Atomizing nozzles mix air and liquid supplied at line pressures of up to 125 psi (8.6 bar). The self-contained air cylinder provides controlled on/off operation at any desired frequency up to 180 cycles per minute. The nozzles come in a choice of round, wide angle round and flat spray patterns and are made in nickel-plated brass or stainless steel and are built to provide uniform distribution of the atomized spray.

BEX Inc.BEX Nozzles
Ph: 734.389.0464
Web site: www.bex.com  


Published Date : 10/23/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665