thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

FABTECH 2013: Plasma Cutting and Marking System


The new Burny Kaliburn Spirit II Series plasma system features FineLine high-definition plasma cutting technology that delivers high cut quality over the entire consumable life at lower costs. The system does this by achieving the least part taper over the life of an electrode. When paired with UltraSharp Hole technology, the system also delivers exceptional hole quality. All Spirit II models deliver precise, square, dross-free cuts with 2° or less cut-edge bevel, using up to 78 percent less plasma gas than some competitors. This family of plasma cutting and marking systems features three amperage options: The 150-amp Spirit II 150 can pierce most metals up to 25 mm thick, with a maximum capacity of 38 mm. The 275-amp Spirit II 275 can pierce most metals up to 32 mmm thick; max capacity is 65 mm. The 400-amp Spirit II 400 pierces most metals up to 50 mm thick, max capacity is 75 mm.

Lincoln Electric Co.
Ph: 888-355-3213
Web site: www.lincolnelectric.com Lincoln Electric Plasma Cutting and Marking System


Published Date : 10/23/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665