thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

WESTEC 2013: Feature-Based CAM Software


FeatureCAM software includes a number of new options for turning, four-axis rotary machining and turn-mill operations. Enhanced turning gives the ability to add fillets to any sharp corners, for example, for automatic deburring, without having to edit the geometry. Turning simulation has been made more realistic and includes the programming and simulation of tailstocks and steadyrests when turning longer parts.  Programming of both turn-mill and four-axis equipment has been made much easier with the ability to change the index axis part-way through programming. The ability to incorporate probing routines into machining programs makes it easier to undertake unsupervised production operations by allowing automated checks to be carried out before, during and after machining.
Delcam
Delcam
Ph: 877-335-2261
Web site: www.delcam.com


Published Date : 8/16/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665