thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

WESTEC 2013: Quick-Change Workholding


The new CL5 quick-change, five-axis workholding system consists of three components: a subplate, a riser, and top tooling made up of a vise or a fixture plate. The subplate transforms a T-slot table into a modular fixturing plate, allowing flexible and easy clamping and locating of other tooling or fixtures. Every plate has built-in clamping and locating for risers, which allows for quick and accurate setups. Designed to get the part up from the machine table, the Quintus quick-change riser allows five-side part access. The Quintus combines the riser, quick-change capability and precise location in one piece. No other accessories are needed. A range of either fixture plates or vises can be readily mounted on top of the Quintus. Several versions of fixture plates and vises are available, and the vises come in a range of sizes, including some concentric styles. Numerous jaw types and sizes are available to accommodate a wide variety of parts.Carr Lane Mfg Quick-Change Workholding

Carr Lane Mfg. Co.
Ph: 314-647-6200
E-mail: cs@carrlane.com
Web site: www.carrlane.com


Published Date : 8/15/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665