thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

WESTEC 2013: Multiaxis Milling and Drilling


The latest hyperMILL 2013 CAM software provides high-value solutions for 2.5 to five-axis milling and drilling all within one program and one consistent interface. The solution contains one set of common utilities such as tool database, macro programming database, simulation and postprocessor for all product ranges. Known for five-axis techniques, hyperMILL software also adds innovative features for two- and three-axis techniques including: auto-climb on contours (no need to select curve directions and sides); smooth linking between jobs and between two- and five-axis drill patterns; adaptive pocketing techniques to select from various high-performance techniques depending on pocket size and on the ratio of the pocket to the cutter size. System’s high-performance hyperMaxx roughing is based on Celeritive’s Volumill kernel and it can be applied in two, three or multiaxis applications.

Open Mind Technologies USA Inc.
Ph: 888-516-1232
E-mail: info.americas@openmind-tech.com
Web site: www.openmind-tech.com  
 Open Mind Technologies Multiaxis Milling and Drilling


Published Date : 8/15/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665