thumbnail group

Connect With Us:

Advanced Manufacturing Media eNewsletters

ME Channels / Product Previews
Share this

WESTEC 2013: Multiaxis CAM


The new four and five-axis simultaneous milling functionality in PartMaker Version 2013 R2 applies across the entire PartMaker CAM suite including the PartMaker Mill, Turn-Mill and SwissCAM modules. The new milling product functionality is known as ASM-MX, or Advanced Surface Machining—Multi-Axis, which is priced cost-effectively relative to other high-end CAM systems for milling. ASM-MX provides the user complete tool-axis control for all five-axis simultaneous machining strategies, and it features a new machining strategy, Spine Finishing, that can be used in either four or five-axis simultaneous operations and is ideal for machining parts with unique curves such as angulated abutments found in the dental implant industry.PartMaker Multiaxis CAM

PartMaker Inc.
Ph: 215-643-5077
Web site: www.partmaker.com  


Published Date : 8/15/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665