thumbnail group

Connect With Us:

ME Channels / Machines & Automation

Promess Opens Customercentric Centers for Process Development, Training

Promess, Inc. (Brighton, MI) has opened a new Process Development Center (PDC) and Training Center on the company’s recently expanded headquarters campus.

Available to customers at minimal or no cost, depending on individual test run volume, the PDC is equipped to support process development, part testing and technology application studies.

“The PDC is equipped with a full range of Promess workstations dedicated exclusively to customer support,” said Glenn Nausley, Promess president. “The workstations can monitor and control force, distance, angle, velocity, torque and many other process variables.”

Equipment available for customer use in the Process Development Center includes:

• Promess Electro-Mechanical Assembly Presses (EMAP) with capacities ranging from a few pounds to over 66,000 lbs (295 N) of force. The largest unit available is the recently announced Promess H-Frame workstation rated at 66,000 lbs of force.

• Torque stations ranging from 1 to 500 lb/ft (1.36 to 678 Nm).

• Rotational Electro-Mechanical Assembly Presses (REMAP) that combine both rotational and linear motion in the same device.
Promess PDC
Each device is fully instrumented and connected to Promess’ Windows based control, data collection and analysis software. Test reporting includes a summary of objectives and requirements, test program profiles, raw data and signature profiles. This information is provided to the customer as well as retained as a permanent record at Promess for backup purposes.

The Training Center offers custom-developed classes to customers and end-users of Promess products. Facilitated by Promess application engineers with a minimum of 10 year’s experience, the classes cover topics including system installation, start-up, operation and maintenance.

“These programs combine classroom-type training with practical ‘hands-on’ experience on Promess equipment and systems,” Nausley added. “The goal is to maximize both the value of the time spent here in the Training Center and the applicability of the knowledge gained by the industry professionals while they are on-site here.”

Promess is a 29-year-old firm that develops, manufactures, and markets its family of sensing devices, electronics, assembly presses and test systems on a global basis.

Published Date : 7/31/2013

Editor's Picks

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665