thumbnail group

Connect With Us:

Advanced Manufacturing Media eNewsletters

ME Channels / Product Previews
Share this

Air Chuck

6" (152-mm) diam chuck with 0.0001 TIR was designed to grip hole saw blanks for turning and tapping. The chuck is a coolant/air blast Model 627-W 6” diameter chuckthrough, two-jaw air chuck with a 1" (25.4-mm) dia. Counter bore for tap clearance. Special sub-jaws with two “bullet” nosed pins grip the blanks between two holes. The jaws are approximately ¾" (19-mm) wide to fit between two hardened and ground full circle segments mounted to the chuck face to support the work piece during machining.
Northfield Precision Instrument Corp.
Ph: 800-810-2482
E-mail: info@northfield.com


Published Date : 7/8/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665