thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

EASTEC 2013: CMM Fixture Plate


Loc-N-Load CMM fixture plate features interlocking fast swap plates that can be configured to fit parts on small or large-sized machines. The system includes docking plates, five sizes of interlocking plates, end caps and a qualifying ball plate. Docking plates are available in lengths of 18 or 30" (457 or 762 mm). Either size can be joined end to end for added length, and interlocking plates of varying lengths in 6" (152-mm) increments can be secured with end caps in 18" and 30" lengths. Creating the right-sized plate configuration is simple. It’s not necessary to cover every inch of a CMM’s granite surface. Inspectors can touch off the granite to find flatness and even place parts on exposed granite next to a Loc-N-Load for inspection.
Kay-Jay Products
Kay-Jay Products Inc.
Ph: 508-869-0373
Web site: www.inspectionarsenal.com


Published Date : 4/18/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665