thumbnail group

Connect With Us:

Advanced Manufacturing Media eNewsletters

ME Channels / Product Previews
Share this

EASTEC 2013: Low-Profile Grippers


No material preparation is required using the Loc-Jaw System for fourth and fifth-axis machining. The rails and gripper towers are serrated to provide a solid and easily adjustable base. The Loc-Jaw has a clamping range of 0.5–4.0" (12.7–101.6 mm), is capable of penetrating 0.060" (1.5-mm) deep per gripper and produces over 6000 lb (2712 kg) of holding force. The low-profile grippers hold on only 0.125" (3.2 mm), allowing full access to all work surfaces including the bottom face. A centering disk can be mounted to bottom of base for quick location on faceplates having centering hole feature. The base is also configured with two drill bushings for precise locating using the included diamond and tapered pins.

Mitee-Bite Products LLC
Ph: 800-543-3580
Web site: www.miteebite.com


Published Date : 4/18/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665