thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

EASTEC 2013: Micro Cutting Tool System


New system is designed for machining very small internal diameters. A two-piece design, the T-Micro system consists of a sleeve and replaceable carbide inserts. Applications include grooving, profiling, chamfering, face grooving/deep face grooving, threading, and back turning starting at 0.024” (0.6 mm). The inserts feature coolant-through capabilities and are available in grade TT9030, a submicron substrate with PVD-TiAlN coating. Inside the sleeve is a locating pin to ensure repeatability when indexing the inserts. This allows operators to return to machining without resetting the tool. The locating pin also allows operators to replace inserts without removing the sleeve from the toolpost.

Ingersoll Cutting Tools
Ph: 815-387-6600
Web site: www.ingersoll-imc.com
Ingersoll


Published Date : 4/18/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665