thumbnail group

Connect With Us:

Advanced Manufacturing Media eNewsletters

ME Channels / Product Previews
Share this

EASTEC 2013: Gaging System


The new Equator 300 Extended Height comparative gage provides a 300-mm height that doubles the space below the measuring volume of the original model. The system can inspect features on parts up to 300-mm tall, with rapid changeover to smaller parts using an extended fixture plate spacer. By using fixturing that positions parts to within 1 mm of where the master was measured, there is no significant effect on system repeatability, and the need for expensive precision fixtures is removed. The Equator fixture plate can be easily exchanged for other plates or for fixture plate spacers.
Renishaw
Renishaw Inc.
Ph: 847-286-9953
E-mail: susan.wilm@renishaw.com


Published Date : 4/18/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665