thumbnail group

Connect With Us:

Advanced Manufacturing Media eNewsletters

ME Channels / Product Previews
Share this

EASTEC 2013: Advanced Tooling Systems


Tooling systems include slim-nose powRgrip 6 (PG6), secuRgrip and the new millTite milling chuck holder. For milling, the new millTite milling chucks are designed to provide the least possible runout and highest gripping force for a milling chuck. Ideal for roughing and finishing, the millTite chucks provide concentricity of 0.0004" (0.01 mm) at 4 × D. MillTite chucks work in CAT 40, CAT 50, BT-40 and HSK 63A spindles. Chuck sleeves accommodate collet diameters from 0.250 to 1.00" (6.35–25.4 mm). The PG6 toolholder has a minimal outside diameter of 0.4" (10 mm) and a clamping diameter range from 0.008 to 0.125" (0.20–3.2 mm) and runout accuracy of 0.0001" (0.002 mm). For advanced cutting tool security, secuRgrip uses PG’s tremendous gripping strength in combination with a patented locking key system and threaded cap. Rego-Fix

Rego-Fix
Ph: 800-734-6349
Web site: www.rego-fix.com


Published Date : 4/17/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665