thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

EASTEC 2013: Workholding Components


OEMs, machine, forming and fabricating shop designers can build application-specific fixtures with standard, off-the-shelf parts and hardware. Imao Quarter Turn Clamps feature a cam and spring operation for fast setup and frequent changeover and provide 90 lb (40 kg) clamping force. Also being exhibited are Fairlane Products’ full line of grippers, rest pads, Swivots swivel/pivoting positioning components, Quick Release ball-lock pins, rollers and bumpers; Kipp spring plungers, rest and riser pads, levers, handles, knobs, and hand wheels; Imao clamps, supports and stops, risers, T-nuts, sliding mounts, springs, supports, grid plates and blocks; OK-Vise single and double wedge clamp designs; Mitee-Bite low-profile edge clamps; and Modern Industries mPower product line which includes quick-change precision locating and mounting systems and modular tooling, plates and columns.Fixtureworks

Fixtureworks
Ph: 586-294-1188
Web site: www.fixtureworks.net


Published Date : 4/17/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665