thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

Lathe Chuck Shields

 Danray Chuck Shield
Heavy-duty steel chuck shields designed for lathes or similar machines serve two basic functions: they provide a safeguard between individuals and point-of-operation or rotating hazards; and they protect individuals from flying chips, sparks, coolant, lubricant, and other particles. The shield hinges left and rests at a 30° angle above the headstock, making it easy to change the chuck or workpiece. The operator does not need to reach over the chuck to move the shield in and out of position. The front portion of the shield can also be hinged up to change the workpiece. These shields comply with OSHA 29 CFR 1910.212 and the ANSI B11.6 safety standard for lathes.
Danray Products LLC
Ph: 866-482-6807
E-mail: ryan.ebens@danrayproducts.com
Web site: www.danrayproducts.com

 


Published Date : 3/4/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665