thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

Vertical Turning Machine


VL 5i is a good fit for small and medium manufacturing companies. It can be used for small and large batch production, and complete-machines workpieces of up to 250 mm in EMAG VL 5idiameter in a single setup. Flanges, gears, gear shafts and steering pinions can be machined with as much efficiency and to the same quality as brake disks or cams. The machine features a 28 kW workspindle with a top torque of 300 N*m, plus a turret that accommodates turning as well as driven tools and has an indexing time of 2.2 seconds. Drilling and milling operations can be incorporated by equipping some or all of the 12 turret stations with driven tools. Its integrated automation system uses a recirculating chain conveyor equipped with carrier prisms that deliver the raw parts directly to a pick-up station for machining. This station is located behind the machining area, so the operator can at any time insert new raw parts at the front of the machine.
EMAG LLC
Ph: 248-477-7440
www.emag.com


Published Date : 1/22/2013

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665