thumbnail group

Connect With Us:

Advanced Manufacturing Media eNewsletters

ME Channels / Product Previews
Share this

HOUSTEX 2013: Cooling Jacket for Quick-Rotating Tools

Cooling Jacket for Quick-Rotating Tools
Cool Flash System wraps cooling lubricant around a rapidly rotating tool in a shrink chuck to protect it from air turbulences in high-speed machining. Bores have been introduced in the clamping chuck, where the coolant is transported to the face area of the tool holder. A disc is positioned at the face side of the Cool Flash chuck. The coolant accumulates at this point on the Cool Flash, builds up a high pressure in this chamber and is distributed over the entire scope of the tool shaft. At the end of the shaft area, the coolant is pressed into the flutes, rinses them out and then reaches the cutting edges of the tool directly without atomizing.

Haimer USA
Ph: 630-833-1500
Web site: www.haimer-usa.com


Published Date : 1/17/2013

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665