thumbnail group

Connect With Us:

ME Channels / Product Previews

Houstex 2013: Cut Off System with Remnant Reduction

Nishijimax NHC-100ND cutoff system features apatent-pending remnant- reduction device to reduce the amount of remnant in auto cycle. When the amount of incoming bar is less Cut Offthan 90 mm + cut length,the NHC-100ND automatically shifts the length-setting device to a special NC-controlled gripper vise on the out feed side of the saw blade. This device grips the bar end from the out feed side of the saw blade and continues until the final bar end is 30 mm. The NHC-100ND continues to cycle as long as bars remain on the table or until a pre-determined number of cuts are made. Saw spindle drive is a 15.5 hp (11.6-kW) induction motor that drives the saw blade spindle via reduction gearbox for precision torque control.
Pat Mooney Inc.


Published Date : 1/14/2013

Editor's Picks

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665