thumbnail group

Connect With Us:

ME Channels / Product Previews

FABTECH 2012: Weld Viewing, Inspection


XirisThe XVC-O Welding View Camera can be mounted right at the welding tip on a tube or pipe mill to allow the operator to remotely view any open arc welding processes such as TIG, plasma, or laser to determine if it is aligned to the seam of the tube or if it needs adjustment. Installing the camera to monitor welding processes can improve weld quality, lower the defect rate, assist in troubleshooting, and improve health and safety. The WI2000p Post Weld Inspection system is an automatic inspection system used on a tube or pipe mill to inspect and detect a variety of quality issues related to the welding process such as mismatch, weld bead height, undercut, and bead position. Defects down to 0.015 mm on a typical tube mill can be detected. 

Xiris Automation Inc. 

Ph: 905-331-6660 

Web site:


Published Date : 10/18/2012

Editor's Picks

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665