thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

FABTECH 2012: Coil-Forming Machine

 

Carell Corp.Model 305 CN3-I roll bending machine is well-suited for producing heat exchanger coils for boilers, heaters, solar, geothermal, and other applications. Series 3000 rolling machines have standard 3, 5, and 9-axis CNC controls for plain or variable pitch and diameter coils. Tangent offsets can often be produced without secondary operations on 9-axis units. Ten models from 1/2 to 6” (12.7–152-mm) pipe or 10” (254-mm) tube capacity are available. The 305 CN3-I incorporates an industrial PC, running Windows XP with automatic axis interpolation and programming via arc length, angle, radius or direct input. Flush shafts permit long coil tangent ends. Coil supports manual or CNC interfaced control pitch and diameter to tight tolerances.  

Carell Corp. 

Ph: 251-937-0948  

Web site: www.carellcorp.com

 


Published Date : 10/18/2012

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665