thumbnail group

Connect With Us:

ME Channels / Event Coverage

FABTECH 2012: Laser Processing Cell


Wayne TrailFlex Laser Pro is a high-speed, three-axis, scanner-based laser processing cell equipped with an IPG 2-kW single-mode fiber laser and a Cambridge Technologies 3-D high-speed scanner head. Flex Laser Pro is well-suited for prototyping, process development and production, or any applications where extreme speed and high accuracy are required. An extremely large field of view (FOV) working area up to 1000 × 1000 mm is created by means of power-adjusted scanner height setup and fully dynamic Z axis. Flex Laser Pro can laser-weld, cut, or mark a nearly unlimited range of parts and shapes. Typical spot size at midrange FOV is about 20 µm. Flex Lase Pro is modular and completely self-contained. Laser, chiller, fume exhaust, gas management, and controls are all on board. 

Wayne Trail 

Ph: 937-295-2120 

Web site:


Published Date : 10/18/2012

Editor's Picks

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665