thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Product Previews
Share this

FABTECH 2012: In-Line Profile Measurement

 

The new Profile360 Generation3 In-Line Profile Measurement System features sensors that have been reengineered around higher-resolution detectors and are produced in the company’s new Advanced Calibration Laboratory. Improvements in the G3 version include improved resolution, accuracy and repeatability, a C-frame angle indicator, an available vortex cooling system, and measurement triggering via encoder or PLC relay contacts. The system is employed by rubber, plastic, wood-plastic composite and ceramic profile extruders to perform 100% inspection of the profile geometry in-line on the extruder; 100% monitoring has been proven to reduce scrap, improve quality, improve yield, and reduce manual off-line sample testing cost in these industries. System ships with PSViewer 2.03 software, which adds many new features including Auto-Save Snapshots that provides electronic storage of profile images for historical reference and an independent exposure time setting allows optimizing the exposure for multi-material profiles. 

 

Starrett-Bytewise Measurement Systems 

 

Ph: 404-915-7516 

 

E-mail: jwilliams@bytewise.com  

 

Web site: www.bytewise.com  

 


Published Date : 10/17/2012

Advanced Manufacturing Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665