thumbnail group

Connect With Us:

Manufacturing Engineering Media eNewsletters

ME Channels / Controls & Software
Share this

Managing Factory Data

 

Effective data management tools and techniques leverage critical metrics from the shop floor

 

By Patrick Waurzyniak
Senior Editor
 

Taking the pulse of the factory, shop-floor data management systems enable manufacturers to effectively collect and analyze factory-floor performance at any given moment. The best data management collection and monitoring systems give factory managers visibility of vital metrics such as overall equipment effectiveness (OEE) that tell them exactly what’s happening in real time on the shop floor.

The latest solutions for shop-floor data collection and analysis come from enterprise resource planning (ERP) software developers and from shop-floor data collection and analysis specialists. Some newer features include systems that are optimized for use with increasingly popular hand-held mobile devices, smartphones and tablet computers.

"The most important point is to convert the volume of manufacturing shop-floor data into actionable information," states Jim Abbassian, president, Predator Software (Portland, OR). "For example, say at a given machine a Machine Alarm happens at 11:05 pm and when you get that data, you know that the current critical part number has stopped producing at a bottleneck workcenter for a Tier 1 customer where there is no scheduled third shift. This is actionable information that can make a real-world difference."

 

Machine Monitoring Mandatory for Lean

 

Real-time data collection and monitoring of machine tools for measuring OEE metrics is essential for successful lean manufacturing efforts and critical shop-floor processes, many observers note. Yet in spite of this need for critical data analysis, a large percentage of shops simply don’t have machine monitoring, notes David Edstrom, president and chairman of MTConnect Institute (McLean, VA). Edstrom, who recently gave a talk on shop-floor networking and communication and the MTConnect protocol at the DMG / Mori Seiki (Hoffman Estates, IL) Innovation Days, says that only about 4–5% of machine tools are monitored today. "Running a shop without remote Photo Courtesy Hexagon Metrology Inc.monitoring is like racing a Corvette in the 24 hours of LeMans without a dashboard," Edstrom says. "Do you know more about your car than you do about your shop?"

Among nearly two dozen key metrics to be derived from shop-floor management systems, Edstrom listed OEE at the top, with others including asset utilization, diagnostics, statistical process control (SPC), jobs/lot tracking, cell management, inspection probing, machine health prognostics, vibration monitoring, preventative maintenance, energy costs, anywhere-anytime access to plant-floor information, and data mining.

Today’s manufacturing customers are looking for a truly plug-and-play solution, Edstrom notes, which is what has been proposed with version 1.2 of MTConnect, a free, open-source protocol based on Internet standards including Hypertext Transfer Protocol (HTTP) and Extensible Markup Language (XML). "Think of MTConnect as the Bluetooth for manufacturing," Edstrom explains. "Essentially, it makes machine tools look like a Web site."

In addition to actionable intelligence, machinists are looking for ease of use from their shop-floor data collection and analysis solutions, adds Abbassian. "Manufacturers are looking for easier-to-use solutions to the complex, real-world shop-floor data problems that they face," he says. "For example, aerospace manufacturers are merging into larger multinationals, yet they have country-specific ITAR restrictions on certain part numbers and with foreign national employees. We recently developed an ITAR verification process integrated within Predator PDM [document management] and Predator DNC [distributed NC] while simplifying the current process for the machinist."

Some key features within version 10 of Predator MDC (Manufacturing Data Collection) include the flexibility to integrate any CNC machine, robot, PLC or person-based shop-floor manufacturing data into a unique knowledgebase for that manufacturer, he adds. The Predator MDC offers the flexibility to present more than 25,000 different reports, charts, dashboards and slide shows, he says, and it can also be affordably integrated within a company’s ERP, MRP, MES and other business systems.

Such data management systems can be a boon for manufacturers working toward lean manufacturing goals. "Shop-floor data management, especially with manufacturing data collection, can provide historical perspective on processes to help drive a new lean initiative," Abbassian notes. "Most manufacturing engineers know where their shop floor is weak, but knowing the cumulative effect to champion change is where we can help. In addition, it can provide the metrics to gauge the ROI or success after the conclusion of the lean initiative."

 

 

Manufacturing Data at Your Fingertips

 

A fairly recent trend in data monitoring is customers looking for mobile data solutions, notes Greg Mercurio, president, Shop Floor Automations Inc. (SFA; La Mesa, CA), a distributor of Predator Software and other shop-floor data collection and networking solutions. Shop Floor Automations also has partnered with Scytec Consulting Inc. (Greenwood, CO), a custom manufacturing software developer offering a hosted machine tool data collection and process control system. The Scytec DataXchange system includes a configurable Real-Time Viewer dashboard for viewing of shop-floor data with automatic updating.

"We’ve looked at certain solutions that don’t meet all of our customers’ needs and we fill in where the software lacks," Mercurio says of SFA’s add-on software plug-ins developed for applications like Predator MDC and other packages. "We build some customized software for that and sell it as a solution. One of the biggest things now is smartphones and Androids.

"Shop-floor data management in some aspects is like an ERP or an MRP system, which is what I refer more to as an accounting system," Mercurio notes. "It’s more involved with ‘Here’s what we should be doing; here’s the order, here’s the traveler, here’s the delivery date that the customer is expecting. But the reality is shop-floor data management or data collection, with Predator or even our solution, differentiates us from an ERP and MRP solution.

"Mostly we are more machine-centric, more concerned about what’s happening on the machine," he adds, "and so we have the capabilities of tapping into the machine and saying ‘What are you currently doing? Is the machine currently cycling? Is it currently not running because of a certain reason? Is it down because of coolant leaks, or maybe it’s down because of preventive maintenance. Maybe there’s a quality problem or a programming problem as well. From a data-management side, we can actually collect and report real-time what’s happening with the machine, and this can be displayed on some kind of dashboard or on a Web interface. This could be in an office, or across the Web. So the idea is, in real-time, they can see what we advocated—if you put something in front of the operator, they can know where they stand and can be measured themselves."New iVET Version of Henning Software's Visual EstiTrack ERP Software

Offering operators some feedback with an LCD screen for their machine that is green for cycling or blue for idle, can help make machinists on the shop floor more competitive with each other, he adds. "The idea is to give the operators some feedback, and then obviously management wants to see the utilization of equipment and productivity. We capture the data in real time, and put it all available to everybody."

The data collection systems also allow historical reporting, Mercurio notes. "That’s important to go back and say ‘How did things perform last week, or yesterday, or over the night shift.’ There’s historical reporting and charting available, so that you can tell if a particular part is run on different machines, which machine has better performance? Is it based on machine time? Is it possibly based on a user that’s better trained?" As a general rule, historical performance data is available for a year, after which it’s archived, he adds.

Costs for shop-floor data collection systems, which can be anywhere from $3000–$5000 per machine, can be a barrier to manufacturers implementing the systems, notes Mercurio, and as an alternative, SFA has been offering the Scytec hosted machine data collection, which the companies displayed at WESTEC earlier this year. The Scytec DataXchange can offer machine monitoring for as little as $45 a month, with no large upfront costs or long-term commitments, with the cloud-based data viewable anywhere from an Internet connection. The system requires no servers to be maintained by customers, Mercurio notes, and Scytec writes software add-ons to packages like Predator, and others, to handle the Web-based machine data collection.

"Over the years, there’s always been a large amount of hurdles that shops say they have in implementing shop-floor data collection," notes Josh Davids, Scytec Consulting president. "A lot of people want data collection and they’re very hesitant. For a lot of smaller companies, and even larger operations, installing database servers and other requirements are daunting."

With Scytec’s cloud-based system, information is available through the Internet and stored in a data center along with the Web servers, so a customer needs to have only one PC to access key manufacturing data, Davids says. "It’s very straightforward," he says. "With some of the newer CNC machines with MTConnect, we can set it up without even going there."

The Scytec solution includes the company’s custom-built real-time dashboards for viewing shop-floor data, he adds. The system uses either MTConnect, Fanuc Focas, hardware and manual methods for collecting manufacturing data, which can include machine cycle times; unplanned or planned downtimes; good, rejected, and scrap parts; and OEE data. The system is scalable from small shops with one or two machines up to multiple-plant operations with multiple languages across many time zones.

 

 

ERP Embracing

Paperless Efforts

 

Along with newer cloud-based systems, another trend in machine data collection with ERP systems is the move toward paperless systems. "Some of the things I’m seeing today is a lot of people want to go green and paperless," says Richard Henning, president of Henning Software (Hudson, OH), developer of the Visual EstiTrack ERP and shop-floor management software. Manufacturers want paperless solutions that offer the latest up-to-date information from the shop floor, which customers can have with Henning’s Paperless Router, Henning notes. "The thing about paper on the floor is that if you have a revision you’ve got to go get the paper. Our remote collection for job data is really now giving us the latest options. You don’t have to scan it, it gives you the material requirements and traceability."

At IMTS, Henning Software also will be introducing the iVET, an interactive mobile version of Henning’s Visual EstiTrack software. "People are carrying around smart devices these days that have barcode scanning capabilities and Bluetooth connectivity."

Users can scan a pallet of parts and immediately know everything about it, with the ability to send a message to the inventory system. "We’re now putting together a set of applications that sit up above our ERP systems. It’s another big trend, and these are typically Web-based applications for the iPhone and iPad," Henning says. "There’s no question that what people want is to have their fingers on the pulse of what’s going on. In my mind, as a developer, this is where things are going. All the new kids coming into the business, they want to run everything by their phone."

This new class of applications will include touch-first interfaces for mobile devices, he adds, noting the touch-based Windows 8, scheduled to debut this fall, will feature so-called Metro-style apps. "This Windows 8 is so different than any other," Henning says, noting the system’s touch and gesture-based capabilities."

Paperless systems are attractive to customers attempting to eliminate manual steps, notes Dave Lechleitner, senior solutions engineer, Exact Software North America (Minneapolis), developer of JobBOSS ERP software. "The big buzzword is talking as much as we can directly to the machine controls," Lechleitner notes of Exact JobBOSS customers, many of which are in the metal fabrication area. "We find the old traditional way of the black box is still in play."

About five years ago, the shift was toward more PCs, but the latest move is toward paperless systems and wider use of handhelds, he notes. The company has offered its Data Collection Mobile Solutions for some time, but "to be quite honest, the adoption was negligible," he adds. "In the last six months to a year, there has been a shift. One customer using an an iPad built their own ruggedized case, and others are using more smartphones and tablets."

For handhelds, a big issue was security, but that has been largely solved, he says, and JobBOSS’ data collection functionality has been rewritten to operate as a Web service. Leichleitner agrees customers now are looking for manufacturing data collection to help support their lean efforts. "That’s one of the things that data collection does. It can help answer questions like where is my throughput? Do I have actionable information on things like isolating bottlenecks, which I think is imperative."

Startup companies operating with less resources, and companies that have been affected adversely by the downturn in particular need fast, accurate data on their manufacturing systems, he adds. With Exact’s new JobBOSS Starter Edition, the company increasingly is finding more customers at the start-up end of the spectrum. "They expect that they’re not doing anything with pen and paper," he adds. "For sure, we see a lot of our shops going paperless within even six months." ME

 

This article was first published in the July 2012 edition of Manufacturing Engineering magazine.  Click here for PDF

 

 

 

 

 

 


Published Date : 7/1/2012

Manufacturing Engineering Media - SME
U.S. Office  |  One SME Drive, Dearborn, MI 48128  |  Customer Care: 800.733.4763  |  313.425.3000
Canadian Office  |  7100 Woodbine Avenue, Suite 312, Markham, ON, L3R 5J2  888.322.7333
Tooling U  |   3615 Superior Avenue East, Building 44, 6th Floor, Cleveland, OH 44114  |  866.706.8665